Business News Network

Top welding fume extractor solutions United Kingdom: Diluter systems are an option when at source extraction may not be practical. These stand-alone systems are typically used in large workshops where crane transportation is present, and ductwork is difficult to install. Diluters continuously filter and recirculate cleaned air into workshops to control welding fume concentration levels. Diluters are commonly used in conjunction with local fume ventilation systems as part of a complete welding shop ventilation system. Proper fume extraction can help reduce employee sicknesses such as metal fume fever. Demonstrating a commitment to employee health and well-being will also help attract and retain a highly-skilled workforce. Discover more details on oskar flexible hose fume extraction arm online store.

Another quality machine from Hobart that has 25A for 190A output range so you can weld up to 5/16 in steel. The power input is only 230V so you won’t be able to use this on your standard household power outlet. The 190 is a wise choice if you’re considering buying a 140A welder but think you may want to upgrade in the future. It’s not much more expensive and you can always turn the 190 down but you can’t turn a 140 up. There’s loads including for the price, you get power, durability, a good duty cycle and all the extras you need to get started, including .030 contact tips, 0.30 flux cored wire and gas gauges. See the full review here.

UK market choice: LONGEVITY Inc is a company that has been around since only 2001. Like LOTOS Technology, it still produces a fine enough quality welder that it has earned its spot on this list. Besides the gas cylinder, this welder comes with everything you need to get started and is simple to set up. With all this, along with its solid performance, this machine is marked at a fair price of under $400. Though it is manufactured in China, the LONGEVITY Migweld is still a quality welder. It is most well-adapted to light use. Compared to Miller and Hobart’s machines, the price is somewhat better without sacrificing much quality. It welds from 24 gauge to ¼ inches of steel. Flux core is available for this welder. The LONGEVITY can run at ten different voltage settings. As an added bonus, it has thermal overload protection like the LOTOS welder.

SMAW is a reliable welding process that offers versatility in welding different metals and various conditions. It’s also portable and lightweight, with no need for a gas tank as with some of the other welding methods mentioned previously. The welding electrode comes as a welding rod, making it perfect for tight spaces and awkward welding positions. Flux-cored arc welding (FCAW) is an automatic or semiautomatic process that uses a welding electrode that contains a flux core that acts as a shielding agent. Additional protection from contaminants is called dual-shielded FCAW, wherein a shielding gas is used along with the flux-cored electrode.

The duty cycle is the amount of time the welder can run continuously before needing to cool down. It’s expressed as the percentage of 10 minutes the MIG welder can run. So a 20 percent duty cycle at 90 amps would mean that when you’re welding at a 90 amp rating, you can go continuously for 2 minutes before the welder needs to cool off for 8 minutes. That means if your 140-amp welder is rated for 20 percent at 90 amps, it’s probably only able to weld for less than a minute at the full 140 amps. How Much Power Do You Need? This is the single factor that affects the cost of MIG welders. Newer 120 volt machines are able to run up to 140 amps, good enough for ?-inch steel. However, at that rating, the duty cycle will be fairly short. That’s not a big concern for home hobbyists and weekend warriors, but it will really put a cramp in your style if you’re doing production welding. Dual-voltage machines are now beginning to provide a lot of control, at least on the 240 side, but unless you’re buying big-name stuff that can get pricey, it’s likely the 120 side won’t provide the same quality of welds.

The S SATC PCS Metal Cutting Disc for Angle Grinder is made with a proprietary aluminum oxide grain combination that creates an aggressive cutting action. This allows the user to cut through materials more easily. In addition, the wheel also has a balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup. This means that you can cut through materials for longer periods of time without having to worry about the accuracy of the cut or the heat that is being generated. The SATC PCS Metal Cutting Discs will cut through most surfaces with ease and do not slow down as they work like other standard discs. These new discs also last much longer than other brands which allows you to make even more cuts before needing a replacement disc.

In many shops, the operator has to go to a tool room or supply area for a new contact tip, coil of wire or other welding accessory. This takes valuable time away from the welding cell and slows down overall productivity. To improve the operating efficiency and minimize wasted time, companies should stock at least a limited supply of all necessary items near the welding station – this includes shielding gas, flux and wire. Another helpful productivity enhancing tip is to switch to larger spools of wire such as from 25 lb. spools to 44 or 60 lb. spools to even larger packages of 1,000 lb. reels or 1,000 lb. drums. A simple switch like this means less changeover time, which adds up over the weeks, months and years. Shops should also be on the lookout for shielding gas waste. A simple device called a surge turbine can be placed at the end of the gun to provide a digital readout of the gas surge and flow rate. If the surge rate is high, investing in a surge guard can reduce the pressure, eliminating gas surges and waste. Leaks in the gas delivery system can also create a potential loss of money. By looking at the amount of consumables purchased each year and then examining the total gas purchased, a company can determine if there is a significant loss. Welding manufacturers and distributors should be able to provide average utilization figures so that loss can be detected. If there is a loss suspected, one of the easiest ways to check for leaks is to shut off the gas delivery system over the weekend. Check the level on Friday evening and then again on Monday morning to determine if gas was used while the system was in shut down mode.

These welding tables are manufactured to the highest standards in Poland, Europe by GPPH. GPPH’s range of welding benches and tables are laser cut for precision and are used in every branch of industry. These welding tables offer perfect flatness (+/- 0.5MM) & are made from 15MM thick S355J2+N grade steel. The hole system that these welding benches offer make precise construction a much quicker process when used in conjunction with the optional tool sets. Batch work processing times can be cut in half when you eliminate the measure and exact angle arrangement of individual parts – this makes producing the same item simple and fast.

The 720 Watt, 6 Amp motor spins the cutting discs up to an impressive 11,000 rpm. That’s more than enough power output to get just about any job done with a 115 mm disc. Weighing in at less than 2 kg, it’s light enough to use one-handed if you’re brave enough. For two-handed use, there’s an indestructible plastic side handle that you can screw into either side. The thing I like about this handle is the 20° angle. You get a better grip for more precise grinding work, compared with standard right-angle grips. Another bonus feature found on this grinder is the soft start. For such a powerful bit of kit, it doesn’t feel like it’s going to jump out of your hand when you turn it on. And thanks to the anti-restart function, it’s safe to use as well.

PACE Fume Extraction Systems provide effective odor reduction from the limited use of adhesives, solvents, and other compounds during handheld drilling, milling, or grinding operations. The filter cartridges are disposable, which makes them easier to use for fume extraction. Sturdy Steel Case and Lightweight Build Quality The Arm-Evac 150 comes with a steel case, which I found to be quite sturdy. It also has a dependable brushless motor that doesn’t need expensive routine maintenance. The overall unit is built with 20-gauge steel, which is ESD-safe. This tiny, low-profile machine will fit anywhere you need, and it comes with lockable casters for convenient mobility and transportation. The compact unit weighs only 20 pounds which makes it extremely lightweight.

Arc welding is used for both repairs and fabrication. An arc welder gives you a solution that joins metals by heating components with an arc. The arc runs between a continuously-fed section of filler metal, which is why many people refer to their car welder or MIG device as a short-circuit transfer system. As reliable and useful as great MIG welders can be, it’s often difficult to buy the best welder for home use or business performance without additional help. There are many different models available on the market today, and each has their diverse selection of features to offer. To ensure that you can make the right decision first-time around, we’ve checked out the latest available MIG welders, to give you a rundown of the best options out there.