Business News Network

Let’s writeabout more training tricks, with a focus on Senior Tech Tutorials. Successful teachers welcome change in the classroom: This relates to the above tip, but in a slightly different way. Have you ever been so bored with your house or your bedroom, only to rearrange it and have it feel like a new room? Change ignites the brain with excitement and adventure. Change your classroom to keep your students on their toes. Simple changes like rearranging desks and routines can breathe new life in the middle of a long year. Successful teachers take time to explore new tools: With the advance of technology, there are fresh new resources and tools that can add great functionality to your classroom and curriculum. There is no doubt that the students you are teaching (far younger than you) probably already use technologies you haven’t tapped into yet. Don’t be afraid to push for technology in the classroom. It is often an underfunded area but in this current world and climate, your students will be growing up in a world where technology is everywhere. Give them a headstart and use technology in your classroom.

Model expectations for your students. Interactively model how to complete an activity or task. We often offer multiple, repeated opportunities when teaching “academic” skills (e.g., letter sounds, math computations), but typically neglect to offer multiple, repeated opportunities for practicing behavioral routines (e.g., lining up at the door, pushing in their chairs). Say what you mean and mean what you say. If you make a request of a student, follow through with that request. If you cannot follow through, avoid placing the demand or providing the instruction. Know yourself and adjust expectations (for yourself and your students) accordingly. Read more details at Teacher Guides.

Learning is not only for young people. Seniors in a digital world can be easily overwhelmed by all the new technology around us. We are surrounded by an array of digital devices, whether its smartphones, social media, tablets, banking machines, or laptops. There’s no avoiding it, so we should learn how to use all these technological advances to make life easier. It’s easy to become tech savvy seniors when you begin to learn more about the technology around you.

It’s always best to start small and have multiple sessions so you don’t give them information overload. The last thing you want to do is get them feeling too overwhelmed and then they give up because you gave them too many tasks to try by themselves. A good website for senior learning is Tech learning for seniors.

Music teaching is hot this days, many people try to learn music, for various reasons. There are a few podcasts that focuses on teaching people about music and one of them is The Music Educator by Bill Stevens. Engage your students instantly by teaching them their favorite songs or genres. All kinds of music can be valuable resources for teaching and learning. There is no need to stick to the genres that have traditionally been associated with music lessons, such as classical and baroque music. Our music teaching app Solfeg.io has a massive song library where you can find music that will appeal to your students. Use Solfeg.io to break the music down and choose specific musical elements to teach to your students. Perhaps the chord progressions, rhythm, or melodic patterns would make a good lesson, and one the students are sure to remember.

Tip of the day for music teachers : Find a Reliable Instrument Dealer: As a music teacher, you’ll need to be able to provide students with reliable and affordable instruments, so it will be important to find a reliable instrument dealer in the area. Young teachers will want to establish a relationship with an instrument dealer far before the school year starts. To help with this feel free to ask local music teachers for ideas, but don’t be afraid to do some exploring yourself.

You can listen to the The Music Educator podcast by using the app from https://play.google.com/store/apps/details?id=com.themusiceducatorpodcast.android.music. You can learn more about Bill Steven by visiting his website at https://www.4themusiceducator.com/.

Let’s make a post today on GMAT tutor resources and, as a result, we will give a few tips about all GMAT issues, focusing on advices about how to prepare for your tests. Problem Solving Tip: Look at All the Answer Choices Before Solving: This is generally a better strategy than solving the problem right away and then looking for a choice that matches your solution, as the choices themselves can provide clues to how to solve the problem—especially if there’s a property or shortcut that can help you do so. For example, if a question appears to ask you to multiply many large numbers together but the answer choices are all in exponent form and are all an order of magnitude away, then you might be able to just estimate and find the closest answer. As always, the GMAT almost never requires you to do extremely laborious equations out by hand—they want to see that you can get to the right answer efficiently (as an excellent businessperson would)! While the IR section relies largely on the same math, verbal, and critical reasoning skills that you need for the other sections of the GMAT, there is one unique skill set that you will need in addition: the ability to interpret various graphics, like bar graphs, scatter plots, and line graphs.

Scoring lower than the school’s range does not necessarily mean an automatic rejection, but higher scores can only help your chances. Together with your previous GPA and academic record, the GMAT gives admissions committees an idea of the rigor you could withstand. Of course, it’s only one part of the application. Admissions staff members remind applicants that they look at the whole of the candidate’s application and never make a decision based on one metric. Still, increasing that score is a priority. We get it. So, we asked GMAT experts to offer their best tips for test takers.

Don’t get us wrong: the GRE isn’t that much fun, either. The GRE is a little bit longer than the GMAT, and it contains some pretty annoying vocabulary questions. But the good news is that the GRE doesn’t have any grammar-based questions, and the GRE quant section doesn’t require the same depth of reasoning as the GMAT. And as we discussed in a series of blog posts comparing the GRE and the GMAT, the GRE allows you to change your answers within each section… which means that the psychological and strategic challenges aren’t as fierce on the GRE as on the GMAT. Even though the GRE offers a more pleasant test-day experience than the GMAT, you’ll still need to take an organized, disciplined approach to the test. The GRE is an adaptive test — albeit in a slightly different way than the GMAT — which means that careless errors can cause disproportionate damage to your score. It’s important to learn to manage your time wisely, and it’s crucial that you avoid unforced errors, just like on the GMAT. Read extra details at GRE Tutor Rates.

Don’t Skip Around Beware! Because the test is taken on a computer, you must answer each question to get to the next one. You can’t count on skipping a question to come back to later as a part of your test-taking strategy. However, as of July 11, 2017, you CAN choose your test section order. Pace Yourself: There are two important factors that can affect your score on the computer-adaptive sections of the test: Questions that appear earlier on the test count more than questions that appear later on the test. Questions you leave unanswered will lower your score.

Testing: after you finish teaching, write down a series of questions on a sheet of paper and try to answer them without looking in the manual or on the note sheets. Personal testing after each repeated lesson is the most efficient stage of the learning process. Reduce irrelevant activities: When you have a lot of books to read, try to read faster, do not get lost in thoughts and need to resume reading, and if you have long texts, try to reorder the keys so that don’t waste time looking for them. Source: https://www.gmatninja.com/.

Here are a few tricks on TIG welders and how to make the best buying picks. The welding setup, welder settings, and electrode selection will impact how fast welders can work. Industrial welders invest time in planning the size and shape of their welding areas, how parts are laid out, and how they supply their shielding gas. Testing settings or an electrode on a piece of scrap metal, especially for a beginners, will save time in the long run. Learn more about setting up an efficient shop here. Welding Downhill Increases Welding Speed: While welding downhill is a faster way to weld, it’s not as strong as welding uphill. On most projects it’s not worth sacrificing strength and durability for the sake of welding speed. However, if the metal is thin enough, then welding downhill won’t make the weld weaker and may even be the correct technique for the job. Learn about uphill and downhill welding and see these diagrams of vertical and downhill welding.

MIG Welders are extremely popular because they tend to cost less than TIG or Stick welders with comparable power and features, are extremely easy to learn, and can tackle a wide variety of projects. Since the filler metal is fed through the MIG welding torch, welders can use both hands to hold the torch steady rather than using one hand to add filler metal, as in TIG welding. The wire feeder also makes MIG welding up to four times faster. The MIG welding process uses an inert gas to shield the weld and to keep it free from impurities. This makes MIG welding very neat and easy to clean up since there isn’t anything to chip away, which is typical for Stick welding. MIG welding can be used on a wide variety of materials such as aluminum and is also frequently used for automotive work. However, MIG also requires the purchase of shielding gas and generally requires materials that cost more when compared to other methods.

Delivery of parts to the welding station in an organized and logical fashion is also a way to reduce welding costs. For example, one company was manufacturing concrete mixing drums. In the fabrication process, the company produced 10 parts for one section, then went on to make 10 parts of another drum section, etc. As pieces came off the line, they were put onto the floor of the shop. When it was time to weld, the operator had to hunt for the pieces needed and sort through them. When the outside welding expert pointed out the amount of time being wasted in this process, the company started to batch each one on a cart. In this way, the pieces needed to weld one drum were stored together and could easily be moved to the welding area. This type of scenario is also true for companies that may outsource parts to a vendor. Though it may cost more to have parts delivered in batches, it may save more in time than having to organize and search through parts to be able to get to the welding stage. How many times each piece is handled in the shop may be an eye-opener to reducing wasted time. To measure such an intangible as this, operators are asked to put a soapstone mark on the piece each time it is touched – some companies are surprised to find out how many times a part is picked up, transported and laid down in the manufacturing process. In the case of one company, moving the welding shop closer to the heat treatment station eliminated four extra times that the part was handled. Basically, handling a part as few times as possible and creating a more efficient production line or work cell will reduce overall costs. Searching for the best Welding Equipment? We recommend Welding Supplies Direct & associated company TWS Direct Ltd is an online distributor of a wide variety of welding supplies, welding equipment and welding machine. We supply plasma cutters, MIG, TIG, ARC welding machines and support consumables to the UK, Europe and North America.

Argon is not the only shielding gas used for TIG welding: Shielding gasses for TIG welding Argon is not the only shielding gas used for TIG welding…just the most common and versatile. Argon will usually get the job done. But there are times when some helium mixed with argon makes a world of difference. Especially if you are using a small inverter TIG welder that is limited to around 200 amps. 100% Argon – is the most often used and coolest gas ..the best all around gas. 75% Argon/25% Helium – even 25% helium will make a big difference when welding aluminum that is thicker than .063″. Anything under .063″ thick and helium is unnecessary. 50/50 argon/helium—awesome for thick aluminum and magnesium 75% Helium/25% Argon – Awesome for thick aluminum castings… puddles really quick and welds cleaner than 100% argon. Also good for welding bronze and pure copper on DCEN.

Several welding supplies tricks: how to become a more skilled welder and how to pick the best welding equipment. For DCEN welding on steels, 1/16″ will work in the 20 to 100 amp rage as long as you prep it right. If you are using 20 amps, you will need a needle sharp point to get good crisp arc starts. At 100 amps, you might not want quite a needle sharp point or you might be putting a smidge of tungsten in the weld. You need a blunter taper. Some charts extend the range to 150 amps for 1/16, but I think that’s way too much. Why not just swap to a 3/32 at that amperage.? 3/32″ is good from about 65 – 200 amps. And 1/8″ 2% thoriated electrodes are good in the 85 – 300 amp range. ( Drop all these numbers by about 30% for A/C) Using helium mixed with the argon will also change the recommended currents because the arc is hotter with the same amps. These recommendations are from down and dirty experience and don’t come from a chart. Most charts I have seen tell you a 1/16 tungsten is good all the way to 150 amps…Please.

Following some simple tips can help you take your MIG welding operation to the next level and ensure you are as safe, efficient and professional as any other shop. Welding helmets, gloves, close-toed shoes and clothes that fully cover exposed skin are essential. Make sure you wear flame-resistant natural fibers such as denim and leather, and avoid synthetic materials that will melt when struck by spatter, potentially causing burns. Also, avoid wearing pants with cuffs or shirts with pockets, as these can catch sparks and lead to injuries.

Do a practice run. This may sound silly, but you’ll find that many professional welders do this before every pass. Get in the most comfortable position you can, with support blocks in place if helpful, and run your hands along the path they will traverse as you make the weld. You will often find that a slight adjustment of your position will allow you to make a longer pass, or to move your hands with less stress. Any strain in your position will have a negative impact on the weld. Also, you build valuable muscle memory when making your practice run, which will help keep everything on track when you make the ‘real’ pass. Clean a contaminated electrode immediately! Every welder will contaminate their electrode at some point, but it’s essential that you replace a contaminated electrode immediately. I usually keep a group of pre-sharpened electrodes right on my welding bench, so I can swap them out without having to walk to my grinder. Source: https://www.weldingsuppliesdirect.co.uk/.