Double surface planer factory in China
Premium double planer machine factory: The most common application involves gluing a coating (veneer, laminate, composite, PVC etc) onto a substratum (MDF, hardboard, plywood, hollow panels, blockwood etc). The basic configuration of the pressing line is comprised of a feed belt, an automatic press and a discharge deck. This configuration can be completed with numerous options, such as glue spreaders, polishers, automatic feeders, disk, roller or belt conveyors, automatic assembling stations, panel turners and stackers. Lines with various degrees of automation can be supplied right up to fully automatic lines that do not require direct intervention by the operator. Read additional details at https://www.v-holdmachinery.com/double-side-planner.
The compound mitre saw has become a fixture in the work shop because it is versatile and accurate. The mitre saw consists of a powerful circular saw mounted on an arm that hinges at the rear of the tool. When the blade is lowered in a chopping motion, it cuts through the work-piece, passing through a slot in the base. The motor and blade can be pivoted with respect to the base for mitre cuts. It is also possible to tilt the blade too, which is handy for cutting crown mouldings which are set at a pitched angle that must also turn around corners. The diameter of the blade determines the maximum cut width. Most models have variable speeds, but the jigsaw is designed to cut precisely not quickly. Feed the wood to the saw flush to the saw table. Jigsaw blades are thin and easily broken, so take care not to bend, twist, or put too much pressure on them. Drill holes in the waste wood at the tightest corners to help you achieve a clean and neat cut. The depth of the saw throat determines how large a piece of wood can be cut on a given saw.
A typical hydraulic down-acting press uses a pair of hydraulic cylinders, one on each end, to generate the tonnage required for the down stroke of the machine. Traditionally, these machines have a C or O frame profile design. With both types, when facing the front of the machine the hydraulic cylinders are located on the left and right hand side of the upper beam. Since the upper beam is being pushed down and up with hydraulic power, the upper beam will fall during a power outage and could create an unsafe environment. Down acting presses are commonly blocked at night to take pressure off of the hydraulic system. The lower beam does not move during bending so the operator will not get feedback that the brake is engaged.
A small tool grinders are a must woodworking machines in shops for sharpening and shaping various tools used in the shop. The grinder has two grinding wheels fastened on to the two ends of a rotating spindle which is driven by a small electric motor. Generally, one of the wheels is used for coarse grinding while the other for fine grinding. Sometimes one of the wheels, particularly which is softer, is provided with a wet-grinding attachment. They are employed for curved surfaces and use abrasive disc and vertical abrasive spindle. During operation, the disc or the spindle as the case may be, rotates and performs the work.
Probably the second most important of single woodworking machines in a carpentry shop is the circular saw. It can be used for ripping, cross cutting, mitering, beveling, rabbeting, and grooving. Although there are many types of circular saws such as universal saw, variety saw, bench saw, the basic working parts are common to all. Each has a flat surface or table upon which the work rests while being cut, a circular cutting blade, cut-off guide, and a ripping fence that acts as a guide while sawing along the grains of the wood. The circular saw usually has provisions for tilting the table upto an angle of 45° to enable the machine to cut at different angles required during mitering, levelling, etc. The size of a circular saw is determined by the diameter of the saw blade.
The wood is fixed between the headstock and tailstock of the lathe. The headstock houses the motor that spins the work-piece. The tailstock is adjustable, moving along the length of the bed to fit work-pieces of various lengths. Once the work-piece is locked in place, the tool rest is set into position. The spinning work-piece is then shaped using a chisel or gouge held fast to the tool rest. Face-plate turning, in with the work-piece is fastened with screws to the face plate of the drive spindle, allows the woodworker to produce bowls and other hollow goods. Find more info at https://www.v-holdmachinery.com/.
Situated in Lunjiao town, Shunde district of Foshan city, the biggest woodworking machinery production base as well as “the Chinese leading woodworking machinery town”, V-HOLD woodworking machinery manufacture Co.,Ltd is a large well-known company integrated woodworking machinery research, processing, marketing as well as application service. We have one year warranty lifetime maintenance service. 2. For any technical problems you can contact us immediately. We have overseas repair and On-going Technical Support.